10.1-inch LCD IPS display

基本参数

10.1-inch LCD display, TFT screen with a resolution of 1024×600 pixels, high brightness of 450cd/m², IPS full viewing angle and wide viewing angle. The touch screen is a standard size and does not require separate development. The touch screen can choose between resistive touch screen and capacitive touch screen. Backlight power supply option, you can use terminal wires independently or weld on the main screen FPC.

尺寸	分辨率	接口方式
10.1″	1280×800	LVDS/MIPI
10.1″	1024×600	LVDS/RGB/MIPI
10.1″	1280×1080	LVDS/MIPI
10.1″	1920×1200	LVDS/MIPI
10.1″	800×1280	LVDS/MIPI
10.1″	1920×1280	LVDS

基本规格

Item	Contents	Unit
Size	10.1	inch
LCM Dimension	235(W) ×143(H) ×4.5(D)	mm
LCD Active Area	222.72(W)×125.28(H)	mm
Number Of Dots	1024 × (RGB) × 600	pixel
LCD Type	a-Si TFT
Viewing Direction	ALL
Driver IC	HX8282A11+HX8696A01
Interface Type	RGB
Operating Temperature	-20℃~ 70℃
Storage Temperature	-30℃~ 80℃

图纸

接口

Pin No.	Symbol	I/O	Function	Remark
1	GND	P	Ground
2	AVDD	P	Analog power
3	VDD	P	Digital power
4	GND	p	Ground
5	VCOM	p	Common Voltage
6	VDD	P	Digital power
7	GND	p	Ground
8-14	NC	–	Not connect
15	GND	P	Ground
16	VDD	p	Digital power
17	GND	p	Ground
18	RXIN3+	I	+LVDS Differential Data Input
19	RXIN3-	I	-LVDS Differential Data Input
20	GND	P	Ground
21	RXCLKIN+	I	+LVDS Differential Clock Input
22	RXCLKIN-	I	-LVDS Differential Clock Input
23	GND	P	Ground
24	RXIN2+	I	+LVDS Differential Data Input
25	RXIN2-	I	-LVDS Differential Data Input
26	GND	P	Ground
27	RXIN1+	I	+LVDS Differential Data Input
28	RXIN1-	I	-LVDS Differential Data Input
29	GND	P	No connect
30	RXIN0+	I	+LVDS Differential Data Input
31	RXIN0-	I	-LVDS Differential Data Input
32	GND	P	Ground
33	GND	P	Ground
34	Reset	I	Global reset pin.
35	STBYB	I	Standby mode , normally pull high
36	SHLR	I	Left or right display control	Note 1.2
37	VDD	P	Digital power
38	UPDN	I	Up or down display control	Note 1.2
39	GND	P	Ground
40	AVDD	P	Analog power
41	VCOM	P	Common Voltage
42	DITH	I	Dithering function enable control .
43	GND	P	Ground
44	VDD	P	Digital power
45	GND	P	Ground
46-52	NC	–	Not connect
53	GND	P	Ground
54	VDD	P	Digital power
55	SELB	I	6bit/8bit . mode select.

			SELB=”0”, LVDS input data is 8bit SELB=”1”, LVDS input data is 6bit
56	VGH	P	Positive Power for TFT
57	VDD	P	Digital power
58	VGL	P	Negative Power for TFT
59	GND	P	Ground
60	NC	–	Not connect